Kratos 2.2.2 is live on iOS & Android · Kratos firmware beta for NerdQAxe++ Rev6 & Rev7 · See what’s new →
Canaan Avalon home miners

Avalon Nano 3S app: monitor & control with Kratos

Watch your Avalon Nano 3S, Nano 3, Mini 3 and Avalon Q next to the rest of your fleet: steady hashrate with the 5-minute rate, chip and inlet temperatures, every fan, power and best difficulty. Switch modes, schedule standby and get alerts, at home or away.

Avalon support at a glance

Models
Nano 3, Nano 3S, Mini 3, Avalon Q
Found by scan
Yes (CGMiner API, plus HTTP on Nano 3)
Modes
Nano Low / Mid / High · Mini 3 Heater / Mining / Night · Q Eco / Standard / Super
Controls
Fan, Nano frequency, restart, standby / wake (Q, Mini 3)
Pools
Through the miner's web page
Checked on units
Yes, Nano 3S readings re-checked 3 Nov 2026

Steady hashrate

Since 2.2.2 the Nano 3S and Mini 3 show a steady hashrate on the card and the 5-minute rate on the miner's page. A healthy Mini 3 no longer shows a warning.

Temperatures that make sense

Chip temperature, inlet temperature, per-fan RPM and the Q's air filter. The Nano 3S keeps its chips around 80 °C on average, and Kratos judges it that way.

Modes & schedules

Switch Low / Mid / High on the Nano, Heater / Mining / Night on the Mini 3, Eco / Standard / Super on the Q. Standby schedules wake the miner again (2.2.2).

Remote, too

With Kratos Link at home, your Avalons stay visible and controllable on mobile data.

Alerts

Offline, temperature, hashrate drop and new best difficulty, with your own thresholds.

Price autopilot

Change modes with day-ahead electricity prices in 19 European bidding zones while Kratos is open.

Set up a Nano 3S in Kratos

  1. New unit? Do its first Wi-Fi setup in Canaan's Avalon Family app, as the quick-start guide in the box describes.
  2. Install Kratos and put your phone on the same Wi-Fi as the miner.
  3. Open Miners › Add › Scan. Kratos finds the Nano 3S and names it. You can also type its IP.
  4. Open the miner to switch modes, set the fan or frequency, or restart it. Configure pools opens the miner's own web page.
  5. Optional: turn on alerts and run Kratos Link to watch it from anywhere.

Solo mining with your Nano 3S

Point it at a solo pool and Kratos shows your best difficulty and your “1 in X” odds of a block. Mineshop's solo pool:

stratum+tcp://solo.mineshop.eu:3333
user: your Bitcoin address · password: x
Looking for the old Kratos Nano 3S firmware guide? The on-miner dashboard beta (2.0–2.2, Feb–Apr 2026) is no longer offered; its recovery image and installer script have been withdrawn. Kratos now supports the Nano 3S directly in the app, with nothing to flash.

Avalon Nano 3S questions.

Is there an Avalon Nano 3S app besides Avalon Family?

Yes. Kratos is a free iPhone and Android app that monitors and controls the Avalon Nano 3 and 3S, Mini 3 and Q alongside your other miners. Canaan's Avalon Family app is still the tool for a new unit's first Wi-Fi setup.

What temperature is normal for an Avalon Nano 3S?

The Nano 3S keeps its chips at about 80 °C on average, so Kratos judges it like a large ASIC rather than a small home miner and doesn't raise false heat warnings.

Can Kratos change the Nano 3S pool?

Pool settings for Avalon home miners open in the miner's own web page from Kratos. Modes, fan, frequency and restart work directly in the app.

Where is the old Kratos Nano 3S firmware?

The earlier on-miner dashboard beta (2.0–2.2, February to April 2026) is no longer offered, and its downloads and installer script have been withdrawn. Use the Kratos app for monitoring and control.

Other miners? See every supported miner, or buy an Avalon at Mineshop.