Kratos

Local-first mining

Kratos firmware

A new dashboard and screen for your NerdQAxe++.

Rev6 + Rev7 · Public beta

Choose your board

Install from Chrome or Edge on a computer using a USB data cable. Your existing Wi-Fi, pool, payout, tuning and fan settings are retained. No Kratos account is required.

A recovery copy is recommended, but optional. Nothing is written until you confirm and click Install.

Rev6 and Rev7 use different packages. Select the revision printed on your board. The installer checks the controller, flash layout, bootloader and installed version. Other models, revisions and unrecognised layouts are not supported.

What is included

  • Local dashboard: live mining readings, 24-hour RAM history, charts and CSV export.
  • Your screen: custom PNG/JPEG backgrounds, artwork, layout editing and import/export.
  • Mining controls: manual tuning, both fans, primary/backup pools and four weighted pools with individual backups.
  • Daily operation: schedules, Discord alerts, event history, Wi-Fi priorities and optional wall-power calibration.
  • Your fleet: local-network monitoring and reviewed pool/restart actions for compatible Kratos miners.
  • Signed updates: future public-beta updates from the miner’s dashboard, with your confirmation.

Optional features stay off until you configure them. ASIC autotuning, RGB and firmware remote-account pairing are not included. The Kratos mobile app is a separate product.

Compatibility

Board
NerdQAxe++ Rev6 & Rev7
Controller
ESP32-S3 · 16 MiB
Rev6 · 0.6.4 beta
USB from stock v1.0.36 with either reviewed bootloader and the supported layout
Rev7 · 0.6.2 beta
USB from supported stock v1.1.0 or a compatible private Kratos build
After install
Open your miner’s local IP address
Other boards
Not available yet

Beta status

The preceding 0.6.1 repair was reported working on one Rev7. Rev7 0.6.2 carries that fix. Rev6 0.6.4 uses a separate regulator profile and adds LAN-request hardening and an authenticator setup panel.

Automated checks and both firmware builds passed. Rev6 0.6.4 has booted and accepted mining shares on one physical Rev6, with both fan readings and existing settings preserved. See the first-boot evidence. Extended thermal, pool-failover, meter and power-loss recovery checks are still pending. This is not a fully hardware-validated stable release.

App and web-filesystem writes are not one atomic operation. An interruption can require USB recovery. Keep normal power and USB connected while installing.

Recovery and known limits →

Need help?

Start with the user guide. If a device is rejected, save its small diagnostic report from the installer.

Kratos community on Discord ↗

Never post a recovery backup, Wi-Fi password, pool password or private meter configuration.

Rev6 Big Screen · 6 TH/s target

An experimental Kratos build for the VastBTC yyslupingB++ with a 480×320 screen and 32 MiB flash, targeting a 6 TH/s-class configuration rather than the 1000 MHz / 8 TH/s tune. It is not for ordinary 16 MiB Rev6 or Rev7 boards.

0.6.9 test: shared Rev7 web GUI and signed Wi-Fi updates. One USB installation is required from 0.6.8 or older and resets settings. Fresh defaults are 750 MHz / 1250 mV; later Wi-Fi updates preserve settings. 6 TH/s has not yet been verified. Test one unit before batch use. A dedicated browser USB installer is available in desktop Chrome/Edge—no Terminal needed. It is separate from the standard Rev6/Rev7 updater.

View factory test, preview & source →

Rev7 stock factory recovery

Need to return a NerdQAxe++ Rev7 to original firmware? The verified upstream v1.1.1 factory image is available separately.

Factory recovery resets Wi-Fi, pool and tuning settings. It is not a Kratos update, and v1.1.1 is not currently an approved migration to Kratos 0.6.2.

Recovery download and instructions →

Downloads by board

The installer loads the matching package after you select your board. Initial installation from stock firmware uses USB. Later signed updates can use Wi-Fi.

NerdQAxe++ Rev6 · 0.6.4-kratos-beta

Verify checksums and installation window

USB SHA-256
a5e253855e6607b55460057732601896502c48987d507fa5656f0a443ed6328d

Wi-Fi SHA-256
7b8f74469b0336deb5f79f989d87798276f9ef0c47de7143f376c0d800167838

Install before 2027-05-04. Installed firmware keeps mining after this date.

NerdQAxe++ Rev7 · 0.6.2-kratos-beta

Verify checksums and installation window

USB SHA-256
3ef1ac224acfac2095dfb803415d67efb526242a04432ed60cdb17ed54cde474

Wi-Fi SHA-256
4572913bf7a98ea12a63ac1237890f4d92fae2264f2da5bb4f0bbad182c71318

Install before 2027-05-03. Installed firmware keeps mining after this date.

Optional local Matter bridge · source and setup instructions; meter pairing needs separate hardware validation.