Kratos

NerdQAxe++ Rev6 0.6.4 · Rev7 0.6.2

Install, personalise and update

Local-first firmware. Your miner stays under your control.

1. First installation over USB

  1. Check the physical board: NerdQAxe++ Rev6 or Rev7. Keep its normal working power supply connected. USB provides the data connection.
  2. Open the USB installer directly in Chrome or Edge on a computer. Safari, Firefox and phones cannot perform this USB installation. Close other serial tools or flasher tabs.
  3. Select the correct revision, confirm the printed model/revision, click Connect USB and select your miner in the browser chooser. Connecting temporarily stops mining but does not write flash.
  4. Choose an existing recovery file, create a new recovery copy, or click Continue without a recovery copy. Creating one can take around 15 minutes. Backups stay on your computer and contain private settings.
  5. The matching board-specific USB package loads automatically. Review the version and beta notice, tick the confirmation, then click Install beta firmware.
  6. Keep the browser, USB and normal power connected until writing and read-back verification finish. Use Restart & disconnect when offered. Open the miner’s local IP on the same network, and verify pool, payout, fans, temperatures and accepted shares.

Existing Wi-Fi, pool/payout, power and fan settings are preserved; no wallet or account credentials are inserted. This is an update, not a factory reset. New optional features are not enabled automatically.

If you already have custom screen artwork, export its layout and keep your original images before USB installation. USB replaces the web filesystem; custom artwork may need uploading again. Supported Wi-Fi updates preserve custom screen files.

Supported stock version: v1.1.0 on the exact recognised Rev7 layout and bootloader. Compatible earlier private Kratos builds are also accepted. Unknown versions, layouts, secure-boot/flash-encryption states or other boards remain blocked—do not substitute a generic factory image.

2. Subsequent signed Wi-Fi updates

After your first public-beta USB install, open your miner’s local dashboard → Install firmware → Check for updates. Allow the update window on kratos.mineshop.eu, choose an available newer release, review it and confirm. No account or sign-in is needed. You can also choose the signed Wi-Fi package manually.

A recovery file is optional. Keep power connected; restart only when the completed updater offers it. If an authenticator is enabled, provide its code when requested. Updates never start automatically.

Moving from stock or a private 0.6.1/earlier test build? Use USB once. Those firmwares do not trust the new public-beta signing key. Do not upload the public Wi-Fi package to the old private updater.

The release’s installation expiry does not switch off firmware already installed. Download a current signed release when the installation window closes.

3. Add your own screen image

  1. Open Screen → Your images. Choose Background for the full display or Artwork for a smaller logo.
  2. Select a PNG/JPEG within the editor’s displayed size limit. Conversion happens locally in your browser. SVG and animated images are not supported.
  3. Choose Fit to keep the whole image or Crop to fill the space, then inspect the preview. Backgrounds become 320 × 170 pixels; artwork becomes 128 × 128.
  4. Click Save image to miner, choose My custom layout, enable the background/artwork and save. Move real telemetry labels in the layout editor.
  5. Normal, block and alert layouts are separate. Use layout export/import to reuse a design; keep the original image files too.

Brightness, rotation, sleep, clock and screen-off are separate settings. Native fault, setup and update messages take priority. Erase saved screen data is an explicit recovery action for damaged custom-screen storage; it does not erase mining or Wi-Fi settings.

4. Pools and payouts

Existing primary/backup and dual-pool modes remain. To use four slots, open Pools → Four pools & backups. Give each enabled slot a primary endpoint, your own payout/worker, a relative weight and an optional backup.

Save stages the configuration. Use Restart to apply deliberately; it is not a live connection change. Weight zero pauses a slot. Weights distribute work, not guaranteed rewards or an exact hashrate. Failed slots redistribute work; recovered slots do not receive catch-up debt.

Blank password fields preserve existing passwords; clearing is explicit. TLS and verification must match your pool’s instructions. Turning four-pool mode off restores the separately saved legacy mode after restart.

On a genuinely fresh configuration the default endpoints are solo.mineshop.eu:3333 and stratum-de.solo.mineshop.eu:3333. Supply your own Bitcoin payout address. Updating never replaces an existing pool or wallet.

5. Everyday features

History, names and local fleet

Overview/detail charts offer 1h, 3h and 24h RAM history with CSV export. Browser reloads keep this history; miner restarts clear it. Missing samples are gaps. Rename the device in My miners or Help & settings; the hostname changes at the next deliberate restart.

Swarm scanning is explicit and bounded to the local /24 subnet. Saved lists are browser-local. Fleet controls let you review pool changes or restarts for up to 16 compatible Kratos miners, one at a time. Payouts/passwords are preserved unless explicitly changed. Stop after current target prevents future requests but cannot undo one already accepted; unknown results are not automatically retried.

Schedules

Set System → Clock first. Up to eight schedules use weekdays and local time for screen, mining, manual tuning, fans and legacy dual-pool allocation. Missed times are skipped, not replayed. The first minute after boot/time sync is skipped; repeated DST hours do not run a slot twice that day. An attempted/edited slot can wait until the next day. Mining stop persists across reboot; start uses a restart. Thermal and update protections retain priority. This is not autotuning.

Notifications and events

Notifications can send selected alerts to your own Discord HTTPS webhook only after you configure and enable it. Thresholds have hold/cooldown periods and startup grace. A test says queued, not delivered—check the destination. Event history is a bounded RAM ring, with export and no raw credentials; restart clears it.

Wall power and Wi-Fi

Wall power distinguishes board watts, calibrated estimates and fresh meter readings. Calibration is limited to your measured range and does not change power controls. The optional local Matter bridge requires a continuously running computer and a meter exposing standard ActivePower. Extract it and follow its README; keep its private config out of shared folders. It never switches an outlet. Meter hardware pairing is still awaiting validation.

Wi-Fi supports up to three priority profiles. Save, then restart deliberately. A working connection is not interrupted just because a higher-priority network reappears. Keep a known-working network. Light/dark/system appearance and other display preferences are saved on the miner.

Protect your Rev6

On Rev6 0.6.4, open Help & settings → Protect your miner → Set up authenticator. Scan the QR on the miner’s screen and enter a current code. Keep that authenticator entry; changing or disabling protection also requires a code.

The Rev6 build rejects internet clients, unexpected Host headers and browser writes from another origin. Raw network log streaming is disabled. This does not replace a trusted LAN: the miner uses local HTTP, and authentication does not encrypt the connection. Never forward its web port to the internet. Use only the signed package for your revision.

Rev7 0.6.2 is unchanged and does not include these new Rev6 security changes yet.

Rev7 return-to-stock option: Download the upstream v1.1.1 factory image and recovery instructions. This resets settings and is separate from restoring your saved private backup. It does not enable migration to Kratos 0.6.2.

6. Recovery and known limits

Connection fails: check the data cable, normal power and competing serial apps. Follow your board’s BOOT/RESET procedure and reconnect. Do not short pins or change the supply. If installation never started, use Restart & disconnect to resume the current firmware.

Interrupted installation: keep the installer tab open. With a genuine saved recovery copy, the session can restore the update regions for that same miner. Reconnect that miner if necessary and use Restore saved firmware when offered. Without a saved backup there is no old-firmware restore; reconnect and use the currently compatible signed USB repair package. If compatibility fails, download the small diagnostics and request help rather than bypassing checks.

Do not use another miner’s raw backup. It can contain that device’s identity and private settings. A recovery backup is not a public firmware download.

App and shared web-filesystem writes are not a single atomic operation; interrupted web writes can require USB. The preceding 0.6.1 repair was owner-reported working on one Rev7. Rev6 0.6.4 has booted and accepted new shares on one physical unit, with both fan readings and stored settings preserved; see the observed checks. Extended thermal soak, pool failover, screen behaviour, scheduled actions, meter pairing and power-loss recovery remain beta checks—not completed hardware certification.

ASIC autotuning, programmable RGB and firmware remote/account pairing are not included. No claim of stable support for Gamma or other boards is made.

Get community help ↗ · Source, licences and build instructions