KRATOS REV6 BIG SCREEN 0.6.9 — SHARED GUI / SIGNED OTA TEST

Exact target: VastBTC yyslupingB++, Rev6 legacy regulator, ESP32-S3,
32 MiB flash, 480x320 panel and four BM1370 chips. Not standard 16 MiB Rev6/7.

FROM 0.6.8 OR EARLIER
Use https://kratos.mineshop.eu/flash/big-screen.html in desktop Chrome/Edge.
These older builds have no native updater; a website change cannot enable it.
One operator-initiated USB installation is necessary. It is a FULL FACTORY
RESET: Wi-Fi, pool/wallet, tuning, authenticator and screen settings are erased.
Keep normal power and USB connected through the complete 32 MiB readback.
An optional recovery copy stays private on your computer. Restart is separate.
Then configure Wi-Fi and your own pool/wallet. No customer payout is embedded.

AFTER 0.6.9 IS INSTALLED
Use Firmware updates > Check for updates in the miner GUI. Later matching
signed packages can update over Wi-Fi, preserving NVS settings, saved tuning
and valid custom screen data. A recovery copy is recommended but not required.
The updater verifies its pinned P-256 signature, exact board/32 MiB layout,
installed bootloader, source version, expiry and both image hashes. It writes
only an inactive application slot and the matching web partition, reads both
back, then changes boot selection. Restart still requires your action.
A power interruption during shared web-partition writes may need USB recovery;
this is not a power-loss-atomic updater and physical recovery testing is pending.
0.6.9 is the first supported OTA source; it does not retroactively enable 0.6.8.

WHAT CHANGED
- Same web GUI/style and navigation as standard Rev7; no special web cockpit.
- Big-screen 480x320 LCD, page timing and responsiveness fixes are retained.
- Fresh defaults: 750 MHz / 1250 mV, as requested by the owner. Missing NVS
  values use defaults independently; existing saved tuning is not overwritten.
- Startup minimum 1200 mV, 800 MHz ceiling, nominal 100 W profile and existing
  thermal protection remain unchanged.
- Separately signed big-screen Wi-Fi channel; standard packages are rejected.
- Per-chip mining diagnostics remain available under System.

VALIDATION
Software build, native policy/defaults/runtime tests and image/source checks
do not establish 6 TH/s, stable thermals or physical OTA/recovery success.
The owner reports 0.6.8 is more responsive. Test 0.6.9 on one unit before a batch.
Only the operator installs, changes live tuning or restarts hardware.

OFFLINE FACTORY IMAGE
The combined BIN belongs at address 0x0, DIO, 40 MHz, 32 MB. It resets ALL
flash. It is not an OTA package. The manufacturer ZIP contains exactly one
flashable BIN. Never upload a factory BIN to an application-only GUI endpoint.
Interrupted browser writes require same-unit download-mode reconnect/repair;
do not restart an incompletely verified installation.

Source, licences, checksums and older immutable downloads:
https://kratos.mineshop.eu/firmware/rev6-big-screen.html#manufacturer
